MCU: STM32F405RGT6
Gyroscope/accelerometer: ICM42688P
Barometer: DPS310
Firmware: INAV, ArduPilot
Target: SpeedyBeeF405WING
Please note: peripheral connection cables are not included. They are available separately as Cable kit v1.
Archived product
Discontinued
Fixed-wing flight controller
BORYSPIL v1
MCU: STM32F405RGT6
Gyroscope/accelerometer: ICM42688P
Barometer: DPS310
Firmware: INAV, ArduPilot
Target: SpeedyBeeF405WING
Please note: peripheral connection cables are not included. They are available separately as Cable kit v1.
Gyroscope/accelerometer
ICM42688P (8 kHz max.)
MCU
STM32F405RGT6 (168 MHz)
Firmware
INAV, Ardupilot
Barometer
DPS310
Interfaces
6 UARTs, I2C, SBus with a built-in inverter on RX2, buzzer output
Target
INAV: SpeedyBeeF405WING (default)
ArduPilot: SpeedyBeeF405WING
ESC outputs
2
Blackbox
MicroSD slot
BEC 1 (FC)
5 V, 3 A
Servo outputs
11
BEC 3 (servos, “Vx” rail)
5/6/7.2 V, 5 A
BEC 2 (VTX, “9V” rail)
9/12 V, 3 A
Dimensions
56 × 36 × 28 mm
Power supply
3-6S LiIon/LiPo
BORYSPIL v1 flight controller
TECHNICAL SPECIFICATIONS
YOU MAY ALSO LIKE
Servo1 duplicated on the PDB
For a single-motor setup, the signal connections (S1, GND) can be made directly on the PDB alongside the motor power connection.
Two battery connection points
Connect the battery from either side to suit your layout.
More powerful BECs
Powerful BEC circuits built with quality components, with selectable voltages for VTX/CAM and servos.
USB on the FC board
No separate USB board to connect or mount: the USB port is on the front of the FC board.
External buzzer
The FC has buzzer connection pads, and a buzzer is included. You can choose whether to connect it.
Easy assembly
Instead of small mounting hardware, we use standoffs soldered directly to the board. This simplifies installation and reduces assembly time, especially in volume production.